Monday, August 5, 2019
Inclusion of Students with Autism Spectrum Disorders
Inclusion of Students with Autism Spectrum Disorders Abstract The purpose of this study is to examine attitudes towards inclusion of students with Autism Spectrum Disorders (ASDs) and self-efficacy beliefs of preservice teachers. Background factors will be explored in relation to both attitudes towards inclusion and self efficacy beliefs. ASDs are becoming the fastest growing developmental disabilities with 1 out of every 150 births being diagnosed as having one of these disorders. ASDs are typically defined as developmental disorders and can range in symptoms from mild to severe. They are identified by abnormal or impaired development in social interaction and communication combined with a restricted repertoire of activities and interests. As a result, more children with ASDs are in need of educational services. Preservice teachers will be surveyed for their level of efficacy as well as attitudes towards inclusion of children with autism spectrum disorders. Preservice Teachers Efficacy: A Correlate of Attitudes towards Inclusion of Students with Autism Spectrum Disorder Chapter 1: Introduction This study will focus on self-efficacy beliefs preservice teachersââ¬â¢ and their attitudes towards inclusion of students with Autism Spectrum Disorders (ASDs). Historically, inclusion studies have broadly focused on students with general disabilities without differentiation of the 13 disability categories as listed in the Individuals with Disabilities Education Act of 2004 (IDEA). It is necessary to briefly address special education law in order to understand how students with exceptionalities are placed and serviced within the education system (either in special education, general education, or a combination of classes). IDEA is the federal legislation that regulates the education of students with disabilities (Woolfolk, 2010). It was originally enacted by Congress in 1975 to ensure that children with disabilities had the same opportunity as students without disabilities (Woolfolk, 2010). The law has seen many revisions throughout the years. The most recent amendments to IDEA were passed by Congress in December 2004. The final regulations were published in August 2006 and termed the Individuals with Disabilities Education Improvement Act of 2004 (IDEIA 2004) (Public Law No. 108-446). IDEIA 2004 guides how states and school districts identify and provide special education and related services to children with disabilities (http://www.nichcy.org/idea.htm). IDEIA 2004 specifically addresses where students with disabilities should be educated and also requires schools to provide a free and appropriate education (FAPE) for all students (Woolfolk, 2010). Although the law does not specifically use the terminology inclusion, it does use the term least restrictive environment (LRE) when speaking of placement for students with disabilities (Inzano, 1999). The law regarding placing students within the LRE has generated many questions as to exactly what constitutes an LRE. According to the law, in an LRE, the student is to be placed with non-disabled peers as much as appropriate throughout the school day (IDEIA, 2004). In addition, the student can only be separated from nondisabled peers if the nature or severity of their disability impedes upon their education (IDEIA, 2004; http://www.findcounseling.com/journal/sped/least.html). Based upon this law, there appears to be a push to teach children with disabilities within the regular education classrooms (Villa, Thousand, Nevin, Liston, 2005 Liston, 2005). As a result of this, there will be a paradigm shift moving away from segregation to integration where students with and without disabilities will be taught together (Giddens, 2001). Inclusive education is identified by the integration of all students, including those with disabilities, into the general education classroom (Avramidis Norwich 2002; Woolfolk, 2010). Inclusion is often confused with the notion of mainstreaming. Schnorr (1990) indicated that mainstreaming and inclusion each deal with students with disabilities in the regular classrooms, the responsibilities of the general education teacher is different for both. In mainstreaming, the regular class teacher is responsible for some of the instruction of the student with exceptionalities while the special education teacher is primarily responsible for the studentââ¬â¢s instruction (Lipsky Gartner, 1989). This is quite different than inclusion. Through inclusion, the regular class teacher is responsible for nearly all of the instruction of the student with special needs. The special education teacher serves as a support to the regular education teacher (Salisbury et al., 1995). For the purposes of this study, inclusion will be defined as full term placement in mainstream general education classes with appropriate special education support services. By studying disability categories under a broad umbrella, it is difficult to differentiate attitudes towards inclusion of specific disability categories. Inclusion of students based on specific disability categories is limited and has not been fully analyzed in current research studies. Research has largely focused on teacher attitudes towards inclusion of students with learning disabilities (Avramidis, Bayliss, et al 2000; Bender, Vail, et al, 1995; Bradshaw Mundia 2006; Buell, Hallam, et al 1999; Burke Sutherland 2004; Campbell, Gilmore et al 2003; Clough Lindsay 1991; Elhoweris Alsheikh 2006; Hammond Ingalls 2003; Jobe, Rust, et al. 1996; Kadell Wiebe 2001; Kalyva, Gojkovic, et al 2007; Kwapy 2004; Reasons 2005; Romer 2004; Ross-Hill 2007; Sebesta 2002; Shade Stewart 2001; Walpole 2006). There have been some studies focusing on emotional and behavioral difficulties within the general education classrooms (Avramidis, Bayliss, Burden 2000; Clough Lindsay 1991; Hastings Oakford 2003; Soodak et al. 1998; Stoiber et al. 1998); cognitive impairments (Center Ward 1987; Thomas 1985), and mild physical disabilities (Center Ward 1987; Forlin 1995). The remaining special education categories have not been the focus of much research (Autism Spectrum Disorder, Blind or Low Vision; Deaf or Hard of hearing; Deaf-Blind; Developmentally Delayed; Language or Speech impairment; Multiple Disabilities; Other health impairment; Orthopedic impairment; and Traumatic brain injury). This study will investigate the attitudes of pre-service teachers toward inclusion of students with ASDs. ASDs fall within the Pervasive Developmental Disorders based upon the Diagnostic and Statistical Manual of Mental Disorders ââ¬â Fourth Edition (DSM-IV, p. 14; 2005). The terms ASDs and Pervasive Developmental Disorder (PDD) are often used synonymously (Pieranagelo Giuliani, 2007). Pervasive Developmental Disorder is a general term that refers to a spectrum of disorders that differ with respect to the number and type of symptoms or age of onset (DSM-IV, pg. 69). Pervasive Developmental Disorders include Autistic Disorder, Rettââ¬â¢s Disorder, Childhood Disintegrative Disorder, Aspergerââ¬â¢s Disorder, and Pervasive Developmental Disorder Not Otherwise Specified (DSM-IV, p. 14; 2005). ASDs are typically defined as developmental disorders in which behavior characteristics range in syndrome expression and the symptoms change as the child develops on a continuum from mild to severe (Volkmar, Paul, Klin, Cohen, 2005). ââ¬Å"They are typically characterized by severe and perva sive impairment in several areas of development that include reciprocal and social interaction skills, communication skills, or the presence of stereotyped behavior, interests, and activitiesâ⬠(DSM-IV, pg 69; 2005). Four million children are born in the United States every year and of these four million children; 560,000 individuals between the ages of 0-21 have an ASD (http://www.cdc.gov/ncbddd/autism/faq_prevalence.htm). Based on prevalence statistics from the Centers for Disease Control and Prevention (CDC) from 2007, one out of every 150 children in the United States has autism (http://www.autism-society.org/site/PageServer?pagename=about_whatis_factsstats). Due to the increase in diagnosis of ASDs, more children are in need of specialized education programs. In 2006, the CDC reported 484,299 individuals between the ages 3 through 21 received services under the ââ¬Ëautismââ¬â¢ classification for special education services (https://www.ideadata.org/tables30th/ar_1-3.htm). Additional data from the CDC reported the state of Indiana serviced 159,679 students under IDEA in 2006 between the ages of 6 and 21. Of these students, 7,391 were identified as having an ASD (https://www.ideadata.org/tables30th/ar_1-3.htm). Illinois reported serving 289,611 students under IDEA in 2006 between the ages of 6 and 21. Of these students, 9,398 students were identified as having an ASD (https://www.ideadata.org/tables30th/ar_1-3.htm). Michigan reported serving 217,673 under IDEA in 2006 between the ages of 6 and 21. Of these students, 9,723 were identified as having an ASD (https://www.ideadata.org/tables30th/ar_1-3.htm). The needs of students with ASDs vary and should be identified and addressed within their educational programming. As stated earlier, ASDs are a group of developmental disabilities that are defined by significant impairments in social interaction, communication, and unusual behaviors (DSM-IV, pg. 69). This is of particular concern when looking at the best learning environment for students with ASDs. Researchers and educators agree that children with ASDs benefit from early intervention services (National Research Council, 2001; Rapin, 1997; Rogers, 1996; Strain, Wolery Izeman, 1998). It has been found to be beneficial to place students with ASDs in the general education classroom so they have early interventions as well as appropriate role models of social skills (Klinger Dawson, 2005). At the same time, this presents a problem because students with ASDs are often not accepted into the general education class. Rejection increases with the studentsââ¬â¢ age and severity of their symptoms which increases their tendency to become socially isolated (Burack, Root, Zigler, 1997 as cited in Volkmar, Paul, Klin, Cohen, 2005). Parents, teachers, and students need to work together to determine which educational services are needed and specifically, to afford them with the greatest possibilities for future transitions (Bock Myles, 1999; Crowley, 2000; Bowe, 2005 as cited in Volkmar, Paul, Klin, Cohen, 2005). Educational placement options for students with ASDs need to be a place where they receive the most benefit as well as keeping in accordance with the law requiring LRE. The increase of students with special needs within general education classrooms has spurred changes in attitudes of teachers, parents, and students regarding the appropriate placement for students with disabilities to receive an education. Research has shown that teacher attitudes towards inclusion have a significant impact upon whether or not inclusion is a success or failure within the classroom (Avramidis Norwich 2002; Bacon Schultz 1991; Barton, 1992; Barton Wiczenski 1993; Bishop, 1986; Carroll, Forlin, Jobling 2003; Chow Winzer, 1992; Coates, 1989; Cook, 2001; Cook, Semmel, Gerber 1999; Good Brophy 1997; Hannah Pliner, 1983; Hayes Gunn, 1988; Idol, Nevin Paolucci-Whitcomb 1994; Roa Lim, 1999; Salend 2001; Schumm et al. 1994; Semmel, Abernathy, Butera, Lesar, 1991; Shade Stewart, 2000; Wiczenski, 1993; Van Reusen, Shoho, Barker 2001; William Algozine, 1977; Wood, 1989). Attitude research pertaining to inclusion of students with disabilities has provided widely var ied results (Bennett et al, 1997; Garriott, Miller, Snyder, 2003; Leyser Tappendorf, 2001; Rea et al. 2002; Shier, 2002). Professional groups vary considerably in their perceptions of which children are most likely to be successful with the inclusion process (Bochner Pieterse 1989). There are educators who support the inclusion of students with disabilities and indicate it has positive benefits for students (Avramidis et al, 2000; Chalmers, 1991; Frederickson, Dunsmuir, Lang Monsen 2004; Leyser Tappendorf 2001; Rodgers, 1987; Rojewski Pollard, 1993; Ward et al, 1994; Villa et al, 1996; York, Vandercook, MacDonald, Heise-Neff Caughey, 1992). If teachersââ¬â¢ attitudes toward inclusion are positive, then the experience of their students will also be positive (Anderson, Chitwood, Hayden 1997; Alexander Strain, 1978). Conversely, many educators are not as accepting of inclusion and hold negative attitudes towards inclusion (Alghazo, Dodeen, Algaryouti, 2003; Berryman, 1989; Bradshaw, 2004; Buell, Hallam, Gamel-McCormick, 1999; Center Ward, 1987; Coates, 1989; Dââ¬â¢Alonzo, Giordano Cross, 1996; Dââ¬â¢Alonzo Ledon 1992; Dixon, 1999; Forlin, Douglas, Hattie, 1996; Gersten, Walker Darch, 1988; Hammond Ingalls 2003; Hayes Gunn, 1988; Horne Ricciardo, 1988; Jamieson, 1984; Jobe, Rust, Brissie, 1996; Larrivee Cook, 1979; Leyser Tappendorf, 2001; Luseno, 2000; Minke et al, 1996; Murphy, 1996; Reiter et al, 1998; Schumm Vaughn 1991; Semmel et al, 1991; Thomas, 1985; Vaughn, Schumm, Jallad, Slusher Saumell, 1996). If the teachersââ¬â¢ attitudes towards inclusion are negative, then the experience of their students will be unsuccessful (Anderson, Chitwood, Hayden 1997; Alexander Strain, 1978). Forlin et al (1999) indicated that teachersââ¬â¢ attitudes towards individuals with disabilities suggest that negative attitudes lead to lower expectations of that student. Research has also shown teachers attitudes toward inclusion were strongly influenced by the nature of the studentââ¬â¢s disabilities (Avramidis, Bayliss, Burden, 2000; Bradshaw and Mundia 2006; Center Ward, 1987; Dean, Elrod Blackbourn, 1999; Jobe, Rust Brissie, 1996; Mak, 2003; Scruggs Mastropieri, 1996; Soodak, Podell, Lehman, 1998). Several studies have shown that specific disability areas negatively affected teacher attitudes towards inclusion. Thomas (1985) studied teachers in England and found they opposed integration of students with intellectual difficulties. This opposition has been replicated in several subsequent studies (Avramidis, Bayliss, Burden, 2000; Center Ward, 1987; Clough and Lindsay, 1991; Forlin, 1995; Hayes Gunn, 1988; Kwapy, 2004; Soodak et al., 1998; Stoiber et al., 1998). Research also shows that teachers had difficulty with children who had emotional and behavioral difficulties (Avramidis et al, 2000; Bowman, 1986; Clough Lindsay, 1991; Forlin, 1995; Hastings Oakford, 2003; Hayes Gunn, 1988; Heflin Bullock, 1999; Kwapy, 2004; Soodak et al., 1998; Stoiber et al, 1998). Center and Ward (1987) found that teachers within their research study were reluctant to include students with more severe physical disabilities or students with intellectual disabilities; however, they were willing to accept the inclusion of students with mild physical disabilities. As a result of the mixed results of research on inclusion, it is important to identify attitudes towards inclusion of students, specifically with ASDs, within the general education classroom. To date, there has been a lack of research on ASDs and teacher attitudes towards inclusion. With the movement within the educational system to integrate all students with disabilities into regular education classrooms, it is going to be important to evaluate teacher attitudes toward inclusion of students with ASDs as the prevalence rate for this specific disability is on the rise. Multiple factors have been found to affect teachersââ¬â¢ attitudes (Salend Duhaney, 1999). These factors primarily relate to the child, teacher, and school. Several factors seem to consistently arise in research regarding attitudes towards inclusion of students with disabilities and include teacher efficacy, the type of disability, and the individualââ¬â¢s teacher preparation program. These areas will be the focus of this research study. Teacher efficacy has been a focus in many research studies (Allinder, 1994; Allinder, 1995; Ashton, 1984; Ashton Webb, 1986; Brownell Pajares, 1999; Gibson Dembo, 1984; Pajares, 1992; Soodak, Podell Lehman, 1998). Teacher efficacy is a teacherââ¬â¢s individual beliefs in their capabilities to reach all of their students, regardless of disability and teach all types of students (Armor et al., 1976; Ashton, 1984; Ashton Webb; 1986; Berman McLaughlin, 1977; Coladarci Breton, 1997; Gibson Dembo, 1984; Tschannen-Moran, Woolfolk-Hoy, Hoy, 1998; Woolfolk, 2010). Many studies have noted that a teacherââ¬â¢s sense of efficacy can have a direct positive affect on student achievement (Anderson, Greene, Loewen, 1988; Ashton, 1984; Midgley, Feldlaufer, Eccles, 1989; Woolfolk, 2010) and is a principal factor impacting classroom effectiveness (Allinder, 1993; Ashton Webb, 1986; Brownell Pajares, 1999; Gibson Dembo, 1984; Pajares, 1992). There has been limited research as to the effect teacher efficacy has upon the students with ASDs. Research on general disability areas has shown that as a teacherââ¬â¢s personal efficacy increases, they become less anxious about including students with disabilities into their classrooms (Allinder, 1994; Soodak, Podell Lehman, 1998). Other research studies have found that teachers often lack confidence in their instructional skills when dealing with a student with a disability (Buell, Hallam, Gamel-McCormick, 1999; Center Ward 1987) thus decreasing their self efficacy. By identifying links between teacher efficacy and teacher attitudes towards inclusion of students with ASDs; more information can be provided to teachers to help them feel confident as well as successful in teaching students with ASDs within their classrooms. Another factor affecting teacher attitudes towards inclusion stems from their teacher preparation programs. Much of the current research on inclusion of students with disabilities has shown that general educators often feel confused when asked to make accommodations for students with disabilities within their classes (Lombard et al., 1998). Educators have indicated that they feel unprepared to implement inclusion as a result of a lack of preparation in education programs (Avramidis, Bayliss Burden, 2000; Bender Ukeje, 1989; Bender, Vail, Scott 1995; Betancourt-Smith 1994; Bruneau-Balderrama, 1997; Buell et al, 1999; Center Ward, 1987; Creal, 2000; Edelen-Smith, Prater, Sileo 1993; Evans, Townsend, Duchnowski, Hocutt, 1996; Ferguson, 1995; Forlin et al. 1999; Garfinkle Schwartz, 2002; Glass 1996; Grbich Sykes, 1992; Hammond Ingalls, 2003; Hastings, Hewes, Lock Witting, 1996; Johnston, Proctor, Corey 1994; King-Sears Cummings, 1996; Kwapy, 2004; Lanier Lanier 1996; Mastrop ieri Scruggs, 2000; Minke, Bear, Deemer Griffin, 1996; Nevin, Cohen, Salazar Marshall, 2007; Olson, 2003; Oââ¬â¢Shea Oââ¬â¢Shea, 1997; Pugach Seidl, 1995; Reber, Marshak, Glor-Scheib, 1995; Reed Monda-Amaya, 1995; Reitz Kerr, 1991; Salend, 2001; Schumm et al. 1994; Schumm Vaughn, 1992; Schuum Vaughn, 1995; Scruggs Mastropieri, 1996; Shanker, 1994; Sindelar, 1995; Singh, 2001; Slusher Saumell 1996; Snyder, 1990; Soodak, Podell Lehman, 1998; Swoboda, 2000; Tait Purdie 2000; Taylor, Richards, Goldstein, Schilit 1997; Vaughn, Schumm, Jallad, Wang, Reynolds, Walberg, 1994; Vaughn, Schumm, Jallad, Slusher, Saumell, 1996; Wang, Reynolds Walberg, 1994; Wanzenried, 1998). Currently, many educators remain insufficiently informed about the practice and theory of inclusion as well as the effect it has on all students within the classroom. Part of teacher preparation programs includes instilling a sense of knowledge and experience of working with students with disabilities. Those with experience working with students with disabilities tend to have more positive attitudes toward inclusion (Beh-Pajooh, 1991; Forlin, Fogarty Carroll, 1999; Gallagher 1985; Gregory, 1997; Hastings et al., 1996; Hastings Graham, 1995; LeRoy Simpson 1996; Pernell, McIntyre, Bader 1985; Sack 1998; Rees, Spreen Harnadek, 1991; Shoho, Katims, Wilks 1997). If teachers feel as though they are unprepared to accommodate students with disabilities; there needs to be a change in teacher preparation programs to ensure that all teachers feel confident and prepared to teach students with exceptionalities. By changing teacher education programs and adding more required coursework regarding students with exceptionalities, teachers should be better equipped to make accommodations and interventions for exceptional students. It is important to account for preservice teachersââ¬â¢ attitudes and beliefs in order to rectify any ill conceived notions about inclusion of children with ASDs. By identifying attitudes towards inclusion of students with ASDs, the inclusion process can be improved. By identifying factors that lead to negative attitudes towards inclusion and dispelling any myths associated with inclusion of students with ASDs, these students may be better served within the general education classroom. In addition, the attitudes towards inclusion may pinpoint weaknesses within teacher preparation programs. By identifying weaknesses, teacher education programs may be able to change or revise classes and curriculum to better meet the needs of future educators. Due to the increase in students identified with ASDs, laws mandating students be taught in the LRE, more general education teachers will have to make accommodations for students with ASDs within their classrooms. By identifying teacher attitudes towards inclusion of students with ASDs, teacher curriculum can be changed and in-services can be added to programming to improve teacher attitudes towards inclusion. Statement of the Problem This study will focus on self-efficacy of preservice teachers and their attitudes towards inclusion of students with Autism Spectrum Disorders (ASDs). Current research shows a range of attitudes towards inclusion of students with disabilities. There is a lack of research regarding teacher attitudes towards the various disability categories; specifically ASDs. Inclusion of students based on specific disability categories, ASDs, has been limited. With the increase in diagnosis of children with ASDs; there will likely be an increase in the placement of students with ASDs into general education classrooms. As a result, general education teachers will likely be responsible for teaching students with ASDs within their classrooms. By identifying attitudes towards inclusion of students with ASDs, the inclusion process can be improved. By identifying factors that lead to negative attitudes towards inclusion, such as teacher efficacy beliefs, and dispelling any myths associated with inclusion of students with ASDs, these students may be better served within the general education classroom. In addition, the attitudes towards inclusion may pinpoint weaknesses within teacher training programs. By identifying weaknesses, teacher education programs may be able to use this information to implement changes or revisions to classes and curriculum to better meet the needs of future educators. Purpose of the Study The primary purpose of this study is to investigate preservice teachersââ¬â¢ sense of efficacy and their attitudes towards inclusion of students with ASDs. Relationships between teacher attitudes towards inclusion, teacher efficacy, the type of student disability, teacher preparation programs, and demographic information will be explored. This study aims to identify preservice teacher attitudes toward inclusion of students with ASDs and their level of teacher efficacy. Additionally, it will explore factors that influence attitudes of preservice teachers toward inclusion of students with ASDs. By understanding the factors that influence preservice teacher attitudes, teacher preparation programs can better prepare teachers for students with exceptionalities, particularly ASDs within the classrooms. Research Questions What are preservice teachersââ¬â¢ attitudes towards inclusion of students with ASDs within the general education classroom? Secondary Questions: What is the relationship between teacher efficacy and teacher attitudes towards inclusion of students with ASDs? What factors are related to preservice teachersââ¬â¢ attitudes towards inclusion of students with ASDs? What is the relationship between the amount of college preparation courses and teacher attitudes towards inclusion of students with ASDs? Is there a relationship between having a special education background and attitudes towards inclusion of students with ASDs? Is there a relationship between having a special education background and teacher efficacy? Rationale Inclusive education integrates all students, regardless of disability, into the general education classroom. Integration of students with disabilities requires teachers to make accommodations and modifications for students in order for them to be successful within the general education classroom. The teacherââ¬â¢s level of efficacy has been found to affect their willingness to make modifications and accommodations for students with disabilities and thus affect their attitudes toward inclusion. This study will investigate preservice teachersââ¬â¢ sense of efficacy and its correlation with attitudes towards inclusion of students with ASDs. Current studies focus on the integration of students with disabilities without differentiating specific disability categories. This study will allow for differentiation of ASDs from the remaining disability categories. Findings from this study will be beneficial for teacher preparation programs. Bandura (1986, 1994, 1997) suggested that predications about behavior outcomes affect the individualââ¬â¢s goals, effort, and motivation to complete a task. Predications of behavior are highly influenced by a personââ¬â¢s self-efficacy (Woolfolk, 2010). Self-efficacy has been defined as the belief in oneââ¬â¢s capabilities to organize and execute the course of action required to manage prospective situations (Bandura, 1995). As a result, people are more likely to engage in behaviors that they believe they are capable of completing successfully. If a person believes they are able to complete an activity with success, they have high self-efficacy; conversely, if they do not feel they are able to complete certain behaviors successfully, they have low self-efficacy. Individuals tend to seek behaviors that they have success with and will put more effort and persistence to activities that they consider to be successful. Self-efficacy is also influenced by a personââ¬â¢s previou s successes or failures with an activity, feedback from others regarding their performance, and success or failure of other people around them (Woolfolk, 2010). For inclusion to be successful, teachers will need to observe a successful implementation of inclusion. In addition, they will have to feel confident in their own abilities to implement inclusion. This confidence will likely come from their teacher education training as well as role models indicating a successful implementation of inclusion. If a teacher does not believe he or she is able to implement inclusion within their classroom, the inclusion process is likely to fail. This has implications for the students within their classrooms. Students without disabilities are likely to model the teacherââ¬â¢s negative attitude towards inclusion and imitate behavior; at the same time, if the teacher has a positive attitude toward inclusion, the children would imitate that behavior. The self-efficacy of the teacher and their resulting actions has a large impact for the successful inclusion of students with ASDs within the general education class. Conceptual Framework This study is rooted in the theories of Albert Bandura, a cognitive theorist. His theories on social learning, social cognition, and self-efficacy have an influence this study. Banduraââ¬â¢s social cognitive theory and his construct of self efficacy (Bandura 1977) help explain how teacherââ¬â¢s attitudes towards inclusion would potentially have an effect upon the students within their classrooms. Banduraââ¬â¢s (1977) theory of self-efficacy is closely tied with teacher sense of efficacy. Teacher sense of efficacy is the belief that a teacher can reach all of his or her students, regardless of disability and teach all types of students (Woolfolk, 2010). Teacher sense of efficacy has a major impact upon the students within a teacherââ¬â¢s classroom. A high sense of teacher efficacy would indicate a teacher believes that he or she is capable to teach their students. Teachers with a high sense of teacher efficacy believe they can teach all of their students, regardless of disability (Woolfolk, 2010). Significance of the Study Due to revisions of federal regulations regarding placement of special education students within the LRE, children with disabilities are spending a majority of their day in the general education classroom. This study is an investigation of preservice teachersââ¬â¢ sense of efficacy and attitudes regarding inclusion of students with ASDs. It is valuable to determine attitudes of preservice teacher regarding the placement of students with ASDs due to research currently citing teacher attitudes strongly effect the success of students (Avramidis Norwich, 2002; Bacon Schultz, 1991; Chow Winzer, 1992; Coates, 1989; Cook, Semmel, Gerber, 1999; Good Brophy, 1997; Hayes Gunn; 1988; Idol, Nevin, Paolucci-Whitcomb, 1994; Roa Lim, 1999; Salend, 2001; Semmel, Abernathy, Butera, Lesar, 1991; Shade Stewart, 2000; Silberman, 1971; Van Reusen, Shoho, Barker, 2001; William Algozine, 1977). Previously, students who needed modifications or adjustments within the classroom were separated from the non-disabled students and placed in special education classrooms. Changes in the law have provided a directive that all students must be educated in the LRE, part of the Education for All Handicapped Children Act (PL 94-142). This law states that individuals, regardless of the severity of their disabilities, are entitled to receive services from the public school systems at no cost to the parents (Public Law No. 94-142). With more students being placed in general education classrooms, it is important for future educators to have positive attitudes towards successful inclusion of students with ASDs. The results of this study may help in the development of effective educational curriculum at universities and colleges with teacher education programs. Education programs need to be committed to producing highly qualified and prepared future educators. This means being prepared to teach and understand the unique needs required by students with ASDs within the classroom. Results from this study may help preservice teachers to gain insight into their attitudes towards inclusion and their efficacy beliefs. Definitions and Terminology Accommodation: ââ¬Å"A change in testing materials or procedures that enables students to participate in assessments in ways that reflect their skills and abilities rather than their disabilitiesâ⬠(Salvia, Ysseldyke Bolt, 2007, p. 682). Americans with Disabilities Act (Coladarci Breton): Public Law No. 10-325 (1 January 2009). ââ¬Å"Prohibits discrimination against persons with disabilities in employment, transportation, public access, local government, and telecommunicationsâ⬠(Woolfolk, 2010, p. 129). Autism: ââ¬Å"Developmental disability significantly affecting verbal and nonverbal communication and social interaction, generally evident before age 3 and ranging from mild to majorâ⬠(Woolfolk, 2007, p. 613). Autism Spectrum Disorders (ASDs): A group of five related developmental disorders that share common core deficits or difficulties in social relationships, communication, and ritualistic behaviors; differentiated from one another primarily by the age of onset and severity of various systems; includes autistic disorder, Asperger syndrome, Rett syndrome, childhood
Sunday, August 4, 2019
The Unexpected Deaths :: essays research papers
Too much time on your hands can be self-destructing. It happens everyday, a woman with seemingly little to do with herself is able to sit and ponder her future; she is able to take a step back and examine where she has been and what could possibly lie ahead. Chilling to some who canââ¬â¢t even remember what they had for breakfast this morning and more disturbing to those who are not happy with the direction they are headed. But does it really matter in the end whether or not your toast had butter or jam on it or whether the things you have done in your time made you rich? The play Rosencrantz & Guildenstern are Dead by Tom Stoppard examines the universal truth of the end of your days and the notion that what is in between really wonââ¬â¢t count when it is all over. à à à à à Guildenstern, the more seemingly wiser of the duo, makes a comment in the first act to Rosencrantz, saying, ââ¬Å"The only beginning is birth and the only end is death- if you canââ¬â¢t count on that, what can you count on?â⬠(39). With this said, donââ¬â¢t you think that our two characters would do all they can to try and change the fate before them, to try to defy the laws of finality and probability, just as it happened in the flipping of the coins? However, it does not seem that these two men are capable of such higher thought. And, as said in class, the script has already been written, so wouldnââ¬â¢t any change you feel you were making already be in the script? à à à à à However, in this play, whether you want to call it a tragic comedy or a comic tragedy, two men have basically seen the fate of all man and know that the end will come. There is nothing anyone can do about it. Moving along in the play though, they seem more and more naà ¯ve to the fact that they too will come to an end. They have refused to see deeper into the play acted out before them, the story that tells of their ending. à à à à à What does bring depth to these characters is the fact that Rosencrantz and Guildenstern do try to make sense of their existence and go through the play blissfully unaware of where it will all end. Ironic as that may sound, especially since Guildenstern did make a point to say that birth and death are the two things in life you can count on, the two men seem to think that just as the coin ended up on heads for ninety times, they too will defy the odds.
Saturday, August 3, 2019
Truman Scholarship Candidate :: essays research papers
The 1990 Americans with Disabilities Act ("ADA") has proven unsuccessful in its goal of empowering people with disabilities to enter the workforce. Although 19.4% of the population have some disability,1 they constitute only 4.3% of the workforce.2 The group's unemployment rate stands at almost 17%, nearly three times the national average.3 A survey for the National Organization on Disabilities found that current levels of employment of people with disabilities between the ages of 16 and 64 have actually dropped two percentage points since 1986, four years before the civil rights legislation was passed.4 The Social Security Administration has additionally reported a decline since 1990 in the percentage of disabled Americans who are working while receiving Supplemental Security Income ("SSI").5 Several factors account for these high levels of unemployment. Health insurance is perhaps the most significant. Disabled people receiving SSI or Social Security Disability Income ("SSDI") lose their federal health insurance if they earn more than $500 per month in income for nine months, a powerful incentive not to work.6 In turn, employers are wary of hiring people with disabilities for fear of driving up insurance premiums for their businesses. Secondly, a further disincentive to work exists in wages, where recipients of SSI or SSDI often earn more by not working. This is particularly true among the severely disabled, where most work available will pay only slightly more than minimum wage.7 Thirdly, ADA has yet to be properly enforced. Eight federal agencies are currently involved in the investigation of varied complaints,8 and the Equal Employment Opportunity Commission ("EEOC") lags ten months in its investigations of complaints.9 A visually impaired job hunter wrote in the New York Times that when he tried to file a complaint with EEOC, "I was told that my complaint would be kept on record and if a number of such complaints for the same employer accumulated, 'action would be taken.ââ¬â¢"10 An additional factor in the high levels of unemployment among people with disabilities is business's lack of knowledge about ADA and the cost of meeting its provisions. Most disabled workers do not need any special accommodations,11 and only 22% of accommodations cost more than $1000. Sixty-seven percent of accommodations cost $500 or less.12 Furthermore, making new construction fully accessible increases costs by no more than one percent.13 Finally, employer prejudice and stereotypes about the disabled affect their employment. Myths persist that those with disabilities have lower attendance rates and safety records and are less capable of performing their jobs than their nondisabled counterparts, although studies have shown that disabled employees achieve similar levels of excellence in each of these categories.
Oprah Winfrey Essays -- essays research papers
"The Oprah Winfrey Show". Her show is known to not only all over the United States, but also known to all around the world. Today she is known as the America's most famous and powerful woman. Every woman in America envies her great fortune and her intelligence. But Oprah insists that she is not special or gifted. She had overcome many hurdles and reached to the top of America's national T.V host. What makes her so popular and most loved entertainer in the United States? Oprah Winfrey, a talk show host, actress, producer and philanthropist, and business woman is the chairwoman of HARPO entertainment in Chicago. She joins the elite company of Lucille Ball and Mary Pickford, as the only woman in T.V and film to own their own production studios. Through HARPO productions, she produces and hosts America's number one popular show, "The Oprah Winfrey show". (Oprah Winfrey talk show bio 1997 p.1) Today many woman in America envies her life; her popularity, intelligence and her great fortunes. Though her success was gained from her hard work and education. She did not have any special background to be a most loved woman in America. She has overcame number of obstacles that most people have encountered in their own lives. She had to deal with poverty, sexual abuse, racism as a child, and her lifelong battle with weight. Oprah Gail Winfrey was born in Kosciusko, Mississippi on January 29, 1954. As a child, she moved to Milwaukee, Wisconsin, then moved back to Nashville. She has lived through poverty, repeated sexual abuse, and a sentence to a juvenile delinquent home. (Hyde 1997 p.57) Oprah was crowned Miss. Black Tennessee at age 19. In 1973. She left Tennessee State University and became a newscaster for WTVF in Nashville. Three years later, Oprah became a news anchor in Baltimore at an ABC station but after 9 months, she was pulled off the air because of an emotional ad-lib delivery. She eventually ended up in Chicago hosting a morning show called "AM Chicago". In less than a year, the show became number one and was expanded to one hour and re-named "The Oprah Winfrey Show". (http://pilot.msu.edu/user/bresnah2/oprahbio.htm 1997 p.1) From there, she has been an actress in the "Color Purple", "The women of Breuster place" and "There are no children here".(Oprah Winfrey)Today, "The Oprah Winfrey Show" is the highest rated talk show in T.V history, and ... ...not, though many women are hoping her to remain in the show and share her power and intelligence with them. Oprah's effect on T.V is so great that since she started to appear on the show, many similar talk shows increased dramatically. And most of these talk show hosts are very popular just like Oprah. Though I believe no one among them can influence American women just like Oprah did. REFERENCES 1. Benezra, K. (1997). Products pitch talk hosts. Media week, pp. 6.2. Dickerson, D (1997). A womans's woman. U.S News & World Report. pp.10. 3. Hyde, W.S (1991). Television and Radio Announcing. Boston:Houghton Mifflin Company. 4. Schlosser, J (1997). Oprah watch. Broadcasting & Cable. pp. 10.5. Stanley, T.L (1997). What they've got. Media week. pp. 34-35.6. http://pilot.msu.edu/user/bresnah2/oprabio.htm. (1997). Oprah Winfrey. pp1.7. http://www.datalist.idsite.com/oprah-table.html. (1997). Oprah Winfrey. pp1.8. http://www.tvtalkshows.com/oprah/bio/. (1997). Oprah Winfrey Talk Show Bio. pp1-2.
Friday, August 2, 2019
Reid Based Prepaid Energy Mater
chapter 1 [pic] 1. 1 Objectives of the Study Prepaid energy meter are being used worldwide to improve the collection of funds for the energy used. Weather it is developed nation or developing nation all electricity boards are facing two major issues 1. Power Theft 2. Collection of funds In the existing system the above two problems are non predictable and time consuming process respectively. To overcome these things in the proposed system Cal cards has developed and implemented as RFID based pre-paid energy meter. Cal card take information management to new heights with RFID technology.Using the state of the art technology, we can now write data into the RFID tag electronically. Using dual Authentication, Stream Encryption and other security features we restrict access to un-authorized personnel for any particular information. In this project three units are important they are RFID Card, RFID Reader and Writer. Tags are programmable and they may be read or read/write i. e. the inform ation stored in the tagââ¬â¢s memory cannot be changed or can be updated as required. The reader powers the antenna to generate radio frequency waves to transmit a signal that activates the tag and allows data to come into or leave the tagââ¬â¢s memory.This card can be designed to hold all amount details including Name of the family head, ID number, resident address and amount has been recharged. chapter 2 [pic] 2. 1 Methodology of the study Methodology: This System assigns a unique card number for each house. A particular house person places the RFID card within 5cm distance from the RFID Reader. The RFID Reader reads down the time, date and for how much amount it was recharged. The success of recharge will be indicated on the LCD display with buzzer acknowledgement sound.The display also indicates the current energy utilization. The Interface software is responsible for energy utilization record processing and calculation amount for the utilized energy. 2. 2 EMBEDDED SYSTEM: Embedded System is a combination of hardware and software used to achieve a single specific task. An embedded system is a microcontroller-based, software driven, reliable, real-time control system, autonomous, or human or network interactive, operating on diverse physical variables and in diverse environments and sold into a competitive and cost conscious market.An embedded system is not a computer system that is used primarily for processing, not a software system on PC or UNIX, not a traditional business or scientific application. High-end embedded & lower end embedded systems. High-end embedded system ââ¬â Generally 32, 64 Bit Controllers used with OS. Examples Personal Digital Assistant and Mobile phones etc . Lower end embedded systems ââ¬â Generally 8,16 Bit Controllers used with an minimal operating systems and hardware layout designed for the specific purpose. Examples Small controllers and devices in our everyday life like Washing Machine, Microwave Ovens, where th ey are embedded in.SYSTEM DESIGN CALLS:[pic] THE EMBEDDED SYSTEM DESIGN CYCLE: [pic] ââ¬Å"V Diagramâ⬠In this place we need to discuss the role of simulation software, real-time systems and data acquisition in dynamic test applications. Traditional testing is referred to as ââ¬Å"staticâ⬠testing where functionality of components is tested by providing known inputs and measuring outputs. Today there is more pressure to get products to market faster and reduce design cycle times. This has led to a need for ââ¬Å"dynamicâ⬠testing where components are tested while in use with the entire system ââ¬â either real or simulated.Because of cost and safety concerns, simulating the rest of the the system with real-time hardware is preferred to testing components in the actual real system. The diagram shown on this slide is the ââ¬Å"V Diagramâ⬠that is often used to describe the development cycle. Originally developed to encapsulate the design process of software applications, many different versions of this diagram can be found to describe different product design cycles. Here we have shown one example of such a diagram representing the design cycle of embedded control applications common to automotive, aerospace and defense applications.In this diagram the general progression in time of the development stages is shown from left to right. Note however that this is often an iterative process and the actual development will not proceed linearly through these steps. The goal of rapid development is to make this cycle as efficient as possible by minimizing the iterations required for a design. If the x-axis of the diagram is thought of as time, the goal is to narrow the ââ¬Å"Vâ⬠as much as possible and thereby reduce development time. The y-axis of this diagram can be thought of as the level at which the system components are considered.Early on in the development, the requirements of the overall system must be considered. As the system is divided into sub-systems and components, the process becomes very low-level down to the point of loading code onto individual processors. Afterwards components are integrated and tested together until such time that the entire system can enter final production testing. Therefore the top of the diagram represents the high-level system view and the bottom of the diagram represents a very low-level view. Notes: â⬠¢ V diagram describes lots of applicationsââ¬âderived from software development. Reason for shape, every phase of design requires a complimentary test phase. High-level to low-level view of application. â⬠¢ This is a simplified version. â⬠¢ Loop Back/ Iterative process, X-axis is time (sum up). Characteristics of Embedded System: â⬠¢ An embedded system is any computer system hidden inside a product other than a computer â⬠¢ There will encounter a number of difficulties when writing embedded system software in addition to those we encounter when we wr ite applications ââ¬â Throughput ââ¬â Our system may need to handle a lot of data in a short period of time. Responseââ¬âOur system may need to react to events quickly ââ¬â Testabilityââ¬âSetting up equipment to test embedded software can be difficult ââ¬â Debugabilityââ¬âWithout a screen or a keyboard, finding out what the software is doing wrong (other than not working) is a troublesome problem ââ¬â Reliability ââ¬â embedded systems must be able to handle any situation without human intervention ââ¬â Memory space ââ¬â Memory is limited on embedded systems, and you must make the software and the data fit into whatever memory exists ââ¬â Program installation ââ¬â you will need special tools to get your oftware into embedded systems ââ¬â Power consumption ââ¬â Portable systems must run on battery power, and the software in these systems must conserve power ââ¬â Processor hogs ââ¬â computing that requires large amount s of CPU time can complicate the response problem ââ¬â Cost ââ¬â Reducing the cost of the hardware is a concern in many embedded system projects; software often operates on hardware that is barely adequate for the job. â⬠¢ Embedded systems have a microprocessor/ microcontroller and a memory. Some have a serial port or a network connection. They usually do not have keyboards, screens or disk drives.APPLICATIONS: 1. Military and aerospace embedded software applications 2. Communication Applications 3. Industrial automation and process control software CLASSIFICATION: â⬠¢ Real Time Systems. â⬠¢ RTS is one which has to respond to events within a specified deadline. â⬠¢ A right answer after the dead line is a wrong answer RTS CLASSIFICATION: â⬠¢ Hard Real Time Systems â⬠¢ Soft Real Time System HARD REAL TIME SYSTEM: â⬠¢ ââ¬Å"Hardâ⬠real-time systems have very narrow response time. â⬠¢ Example: Nuclear power system, Cardiac pacemaker. SOFT RE AL TIME SYSTEM: ââ¬Å"Softâ⬠real-time systems have reduced constrains on ââ¬Å"latenessâ⬠but still must operate very quickly and repeatable. â⬠¢ Example: Railway reservation system ââ¬â takes a few extra seconds the data remains valid. LANGUAGES USED: â⬠¢ C â⬠¢ C++ â⬠¢ Java â⬠¢ Linux â⬠¢ Ada â⬠¢ Assembly MPLAB FEATURES: MPLAB Integrated Development Environment (IDE) is a free, integrated toolset for the development of embedded applications employing Microchip's PICà ® and dsPICà ® microcontrollers. MPLAB Integrated Development Environment (IDE) is a free, integrated toolset for the development of embedded applications employing Microchip's PICà ® and dsPICà ® microcontrollers.MPLAB IDE runs as a 32-bit application on MS Windowsà ®, is easy to use and includes a host of free software components for fast application development and super-charged debugging. MPLAB IDE also serves as a single, unified graphical user interface for additio nal Microchip and third party software and hardware development tools. Moving between tools is a snap, and upgrading from the free software simulator to hardware debug and programming tools is done in a flash because MPLAB IDE has the same user interface for all tools.MPLAB IDEââ¬â¢s SIM, high speed software simulator for PIC and dsPIC (Digital Signal Processing PIC Microcontroller) devices with peripheral simulation, complex stimulus injection and register logging. CHAPTER 3 [pic] 3. 1 Block Diagram of RFID PREPAID energy meter BLOCK DIAGRAM 3. 2 Description of the Block Diagram The AC main Block is the power supply which is of single phase 230V ac. This should be given to step down transformer to reduce the 230V ac voltage to low voltage. i. e. , to 6V or 12V ac this value depends on the transformer inner winding. The output of the transformer is given to the rectifier circuit.This rectifier converts ac voltage to dc voltage. But the voltage may consist of ripples or harmonics. To avoid these ripples the output of the rectifier is connected to filter. The filter thus removes the harmonics. This is the exact dc voltage of the given specification. But the controller operates at 5V dc and the relays and driver operates at 12V dc voltage. So we need a regulator to reduce the voltage. 7805 regulator produces 5V dc. The 7805 regulator produces 5V dc and this voltage is given to PIC micro controller and sensors. The outputs of the sensors are also given to PIC micro controller.LCD, Keypad unit, SMART CARD read and write unit are connected to the controller. The controller reads the SMART CARD data from SMART CARD reader. The controller displays the data on LCD, depends upon the energy consumption the amount will be reduced. [pic] 3. 3 circuit diagram of RFID PREPAID energy meter: [pic] 3. 4 Circuit Description POWER SUPPLY: Power supply unit consists of Step down transformer, Rectifier, Input filter, Regulator unit, Output filter. The Step down Transformer is us ed to step down the main supply voltage from 230V AC to lower value.This 230 AC voltage cannot be used directly, thus it is stepped down. The Transformer consists of primary and secondary coils. To reduce or step down the voltage, the transformer is designed to contain less number of turns in its secondary core. The output from the secondary coil is also AC waveform. Thus the conversion from AC to DC is essential. This conversion is achieved by using the Rectifier Circuit/Unit. The Rectifier circuit is used to convert the AC voltage into its corresponding DC voltage. There are Half-Wave, Full-Wave and bridge Rectifiers available for this specific function.The most important and simple device used in Rectifier circuit is the diode. The simple function of the diode is to conduct when forward biased and not to conduct in reverse bias. The Forward Bias is achieved by connecting the diodeââ¬â¢s positive with positive of the battery and negative with batteryââ¬â¢s negative. The effi cient circuit used is the Full wave Bridge rectifier circuit. The output voltage of the rectifier is in rippled form, the ripples from the obtained DC voltage are removed using other circuits available. The circuit used for removing the ripples is called Filter circuit.Capacitors are used as filter. The ripples from the DC voltage are removed and pure DC voltage is obtained. And also these capacitors are used to reduce the harmonics of the input voltage. The primary action performed by capacitor is charging and discharging. It charges in positive half cycle of the AC voltage and it will discharge in negative half cycle. Here we used 1000à µF capacitor. So it allows only AC voltage and does not allow the DC voltage. This filter is fixed before the regulator. Thus the output is free from ripples. Regulator regulates the output voltage to be always constant.The output voltage is maintained irrespective of the fluctuations in the input AC voltage. As and then the AC voltage changes, th e DC voltage also changes. Thus to avoid this Regulators are used. Also when the internal resistance of the power supply is greater than 30 ohms, the output gets affected. Thus this can be successfully reduced here. The regulators are mainly classified for low voltage and for high voltage. Here we used 7805 positive regulators. It reduces the 6V dc voltage to 5V dc Voltage. The Filter circuit is often fixed after the Regulator circuit. Capacitor is most often used as filter.The principle of the capacitor is to charge and discharge. It charges during the positive half cycle of the AC voltage and discharges during the negative half cycle. So it allows only AC voltage and does not allow the DC voltage. This filter is fixed after the Regulator circuit to filter any of the possibly found ripples in the output received finally. Here we used 0. 1à µF capacitor. The output at this stage is 5V and is given to the Microcontroller Microcontroller and sensors are operated at 5V dc voltage. The output of the 7805 regulator is connected to PIC 16f877A microcontroller. Controller CircuitThe PIC 16f877A microcontroller is a 40-pin IC. The first pin of the controller is MCLR pin and the 5V dc supply is given to this pin through 10K? resistor. This supply is also given to 11th pin directly. The 12th pin of the controller is grounded. A tank circuit consists of a 4 MHZ crystal oscillator and two 22pf capacitors is connected to 13th and 14th pins of the PIC. The circuit consists of MAX-232 IC. It is a 16-pin dual in package IC. The 11th and 12th pins of MAX-232 IC are connected to the 25th and 26th pins of the PIC microcontroller. These are receiver OUT and Transmitter IN pins respectively.LCD is connected to the RC0 to RD7 pins of the PIC microcontroller. 13th, 14th and 15th pins of the MAX-232 IC are connected to the smart card read Buffer. The Keypad unit connected to the RB0 to RB3 pins of the PIC micro controller. The keypad unit consists of 4 switches. One is for menu, sec ond is Exit, third one is for Clear and the other is for Day Increment. MAX-232 IC is used to convert the voltage from 5V to 10V and 10V to 5V. This IC is used to communicate with the PC. It also acts as voltage converter. The LCD used here is to display the Attendance details. [pic] 3. 5 CIRCUIT OPERATIONThe input of the circuit is taken from the main. It is a single phase 230V ac voltage. This 230 AC voltage cannot be used directly, thus it is stepped down. The Step down Transformer is used to step down the main supply voltage from 230V AC to lower value. Because the microcontroller and sensors are operated at +5V dc voltage and relays and drivers will be operate at +12V dc voltage. So first this 230C AC voltage should be stepped down and then it should be converted to dc. After converting to dc it is applied to controller, sensors, relays and drivers. In this project we used 230/12V step down transformer.In this circuit we used two regulators. 7805 regulator for producing 5V dc, and 7812 regulators for 12V dc voltage. The output of 7805 regulators is given to PIC microcontroller and three sensors. The output of the 7812 regulator is connected to driver IC and a Relay. The main parts of this project are smart card and PIC micro controller. The coding will be installed to microcontroller through PIC Flash micro systems compiler unit. The crystal oscillator is used to generate the clock pulses to the PIC micro controller. The speed of the microcontroller depends upon the value of the crystal oscillator.In this project we used the 4 MHz crystal oscillator. Whenever recharged smart card shown in front of the reader the data from card will be read and send to controller through reader. The controller confirms whether it is old or new card. After this it will automatically open the lock to use EB power supply. If the wrong card shown, controller activate the alarm. Depends on the energy consumption the amount will reduced by the controller, when its come to below zero the controller automatically cut down the EB power supply through driver unit. In the driver unit ULN2003 is used as driver to driver the 12v relay.We inserted the process into the controller through coding. Coding was developed in Embedded ââ¬ËCââ¬â¢ Language. CHAPTER 4 [pic] 4. 1 Hardware Requirements: 1. Power supply unit 2. Microcontroller 3. MAX-232 IC 4. LCD 5. Keypad Unit 4. 2 POWER SUPPLY UNIT: Circuit Diagram [pic] Power supply unit consists of following units i) Step down transformer ii) Rectifier unit iii) Input filter iv) Regulator unit v) Output filter 4. 3. 1 Stepdown transformer: The Step down Transformer is used to step down the main supply voltage from 230V AC to lower value. This 230 AC voltage cannot be used directly, thus it is stepped down.The Transformer consists of primary and secondary coils. To reduce or step down the voltage, the transformer is designed to contain less number of turns in its secondary core. The output from the secondary coil is a lso AC waveform. Thus the conversion from AC to DC is essential. This conversion is achieved by using the Rectifier Circuit/Unit. 4. 3. 2 Rectifier Unit: The Rectifier circuit is used to convert the AC voltage into its corresponding DC voltage. There are Half-Wave, Full-Wave and bridge Rectifiers available for this specific function. The most important and simple device used in Rectifier circuit is the diode.The simple function of the diode is to conduct when forward biased and not to conduct in reverse bias. The Forward Bias is achieved by connecting the diodeââ¬â¢s positive with positive of the battery and negative with batteryââ¬â¢s negative. The efficient circuit used is the Full wave Bridge rectifier circuit. The output voltage of the rectifier is in rippled form, the ripples from the obtained DC voltage are removed using other circuits available. The circuit used for removing the ripples is called Filter circuit. 4. 3. 3 Input Filter: Capacitors are used as filter.The ri pples from the DC voltage are removed and pure DC voltage is obtained. And also these capacitors are used to reduce the harmonics of the input voltage. The primary action performed by capacitor is charging and discharging. It charges in positive half cycle of the AC voltage and it will discharge in negative half cycle. So it allows only AC voltage and does not allow the DC voltage. This filter is fixed before the regulator. Thus the output is free from ripples. 4. 3. 4 Regulator unit: [pic] 7805 Regulator Regulator regulates the output voltage to be always constant.The output voltage is maintained irrespective of the fluctuations in the input AC voltage. As and then the AC voltage changes, the DC voltage also changes. Thus to avoid this Regulators are used. Also when the internal resistance of the power supply is greater than 30 ohms, the output gets affected. Thus this can be successfully reduced here. The regulators are mainly classified for low voltage and for high voltage. Furth er they can also be classified as: i) Positive regulator 1ââ¬â> input pin 2ââ¬â> ground pin 3ââ¬â> output pin It regulates the positive voltage. ii) Negative regulator ââ¬â> ground pin 2ââ¬â> input pin 3ââ¬â> output pin It regulates the negative voltage. 4. 3. 5 Output Filter: The Filter circuit is often fixed after the Regulator circuit. Capacitor is most often used as filter. The principle of the capacitor is to charge and discharge. It charges during the positive half cycle of the AC voltage and discharges during the negative half cycle. So it allows only AC voltage and does not allow the DC voltage. This filter is fixed after the Regulator circuit to filter any of the possibly found ripples in the output received finally. Here we used 0. 1à µF capacitor.The output at this stage is 5V and is given to the Microcontroller. 4. 4 MICRO CONTROLLER: A computer-on-a-chip is a variation of a microprocessor which combines the processor core (CPU), some memory, and I/O (input/output) lines, all on one chip. The computer-on-a-chip is called the microcomputer whose proper meaning is a computer using a (number of) microprocessor(s) as its CPUs, while the concept of the microcomputer is known to be a microcontroller. A microcontroller can be viewed as a set of digital logic circuits integrated on a single silicon chip. This chip is used for only specific applications. . 4. 1 ADVANTAGES OF USING A MICROCONTROLLER OVER MICROPROCESSOR: A designer will use a Microcontroller to 1. Gather input from various sensors 2. Process this input into a set of actions 3. Use the output mechanisms on the Microcontroller to do something useful 4. RAM and ROM are inbuilt in the MC. 5. Cheap compared to MP. 6. Multi machine control is possible simultaneously. Examples: 8051 (ATMAL), PIC (Microchip), Motorola (Motorola), ARM Processor, Applications: Cell phones, Computers, Robots, Interfacing to two pcââ¬â¢s. 4. 4. 2 Microcontroller Core Features: â⬠¢ High-per formance RISC CPU. Only 35 single word instructions to learn. â⬠¢ All single cycle instructions except for program branches which are two cycle. â⬠¢ Operating speed: DC ââ¬â 20 MHz clock input DC ââ¬â 200 ns instruction cycle. â⬠¢ Up to 8K x 14 words of FLASH Program Memory, Up to 368 x 8 bytes of Data Memory (RAM) Up to 256 x 8 bytes of EEPROM data memory. â⬠¢ Pin out compatible to the PIC16C73B/74B/76/77 â⬠¢ Interrupt capability (up to 14 sources) â⬠¢ Eight level deep hardware stack â⬠¢ Direct, indirect and relative addressing modes. â⬠¢ Power-on Reset (POR). â⬠¢ Power-up Timer (PWRT) and Oscillator Start-up Timer (OST). Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation. â⬠¢ Programmable code-protection. â⬠¢ Power saving SLEEP mode. â⬠¢ Selectable oscillator options. â⬠¢ Low-power, high-speed CMOS FLASH/EEPROM technology. â⬠¢ Fully static design. â⬠¢ In-Circuit Serial Programming (ICSP ) . â⬠¢ Single 5V In-Circuit Serial Programming capability. â⬠¢ In-Circuit Debugging via two pins. â⬠¢ Processor read/write access to program memory. â⬠¢ Wide operating voltage range: 2. 0V to 5. 5V. â⬠¢ High Sink/Source Current: 25 mA. â⬠¢ Commercial and Industrial temperature ranges. â⬠¢ Low-power consumption.In this project we used PIC 16f877A microcontroller. PIC means Peripheral Interface Controller. The PIC family having different series. The series are 12- Series, 14- Series, 16- Series, 18- Series, and 24- Series. We used 16 Series PIC microcontroller. 3. PIC MICROCONTROLLER 16F877A 1. INTRODUCTION TO PIC MICROCONTROLLER 16F877A The PIC 16f877A microcontroller is a 40-pin IC. The first pin of the controller is MCLR pin and the 5V dc supply is given to this pin through 10K? resistor. This supply is also given to 11th pin directly. The 12th pin of the controller is grounded.A tank circuit consists of a 4 MHZ crystal oscillator and two 22pf capacitor s is connected to 13th and 14th pins of the PIC. 2. FEATURES OF PIC MICROCONTROLLER 16F877A â⬠¢ Operating frequency: DC-20Mhz. â⬠¢ Flash program memory (14 bit words):8K â⬠¢ Data memory (in bytes): 368 â⬠¢ EEPROM Data memory (in bytes):256 â⬠¢ Interrupts: 15 â⬠¢ I/o ports: A, B, C, D, E â⬠¢ Timers: 3 â⬠¢ Analog comparators: 2 â⬠¢ Instructions: 35 4. 3. 3 pin diagram of pic 16f874a/877a: [pic] 4. 3. 4 FUNCTIONAL BLOCK DIAGRAM OF PIC 16F877A [pic] 4. 4 LCD Display: Liquid crystal display (LCD) has material which combines the properties of both liquid and crystals.They have a temperature range within which the molecules are almost as mobile as they would be in a liquid, but are grouped together in an order form similar to a crystal. LCD DISPLAY: [pic] More microcontroller devices are using ââ¬Ësmart LCD' displays to output visual information. The following discussion covers the connection of a Hitachi LCD display to a PIC microcontroller. LCD disp lays designed around Hitachi's LCD HD44780 module, are inexpensive, easy to use, and it is even possible to produce a readout using the 8 x 80 pixels of the display.Hitachi LCD displays have a standard ASCII set of characters plus Japanese, Greek and mathematical symbols. For an 8-bit data bus, the display requires a +5V supply plus 11 I/O lines. For a 4-bit data bus it only requires the supply lines plus seven extra lines. When the LCD display is not enabled, data lines are tri-state which means they are in a state of high impedance (as though they are disconnected) and this means they do not interfere with the operation of the microcontroller when the display is not being addressed. The LCD also requires 3 ââ¬Å"controlâ⬠lines from the microcontroller. Enable (E) |Thisà line allows access to the display through R/W and RS lines. When this line is low, the LCD is disabled and | | |ignores signals from R/W and RS. When (E) line is high, the LCD checks the state of the two c ontrol lines and | | |responds accordingly. | |Read/Write (R/W) |This line determines the direction of data between the LCD and microcontroller. When it is low, data is written | | |to the LCD. When it is high, data is read from the LCD. |Register select (RS) |With the help of this line, the LCD interprets the type of data on data lines. When it is low, an instruction is | | |being written to the LCD. When it is high, a character is being written to the LCD. | Logic status on control lines: Eà à à à 0 Access to LCD disabled 1 Access to LCD enabled R/W 0 Writing data to LCD 1 Reading data from LCD RSà à à 0 Instruction 1 Character Writing data to the LCD is done in several steps: Set R/W bit to low Set RS bit to logic 0 or 1 (instruction or character) Set data to data lines (if it is writing) Set E line to highSet E line to low Read data from data lines (if it is reading). Reading data from the LCD is done in the same way, but control line R/W has to be high. When we send a high to the LCD, it will reset and wait for instructions. Typical instructions sent to LCD display after a reset are: turning on a display, turning on a cursor and writing characters from left to right. When the LCD is initialized, it is ready to continue receiving data or instructions. If it receives a character, it will write it on the display and move the cursor one space to the right. The Cursor marks the next location where a character will be written.When we want to write a string of characters, first we need to set up the starting address, and then send one character at a time. Characters that can be shown on the display are stored in data display (DD) RAM. The size of DDRAM is 80 bytes. |The LCD display also possesses 64 bytes of Character-Generator (CG)|[pic] | |RAM. This memory is used for characters defined by the user. Data | | |in CG RAM is represented as an 8-bit character bit-map.Each | | |character takes up 8 bytes of CG RAM, so the total number of | | |ch aracters, which the user can define, is eight. In order to read | | |in the character bit-map to the LCD display, we must first set the | | |CG RAM address to starting point (usually 0), and then write data | | |to the display.The definition of a ââ¬Ëspecial' character is given in| | |the picture. | | Before we access DD RAM after defining a special character, the program must set the DD RAM address. Writing and reading data from any LCD memory is done from the last address which was set up using set-address instruction. Once the address of DD RAM is set, a new written character will be displayed at the appropriate place on the screen.Until now we discussed the operation of writing and reading to an LCD as if it were an ordinary memory. But this is not so. The LCD controller needs 40 to 120 microseconds (uS) for writing and reading. Other operations can take up to 5 mS. During that time, the microcontroller can not access the LCD, so a program needs to know when the LCD is bu sy. We can solve this in two ways. One way is to check the BUSY bit found on data line D7. This is not the best method because LCD's can get stuck, and program will then stay forever in a loop checking the BUSY bit. The other way is to introduce a delay in the program.The delay has to be long enough for the LCD to finish the operation in process. Instructions for writing to and reading from an LCD memory are shown in the previous table. At the beginning we mentioned that we needed 11 I/O lines to communicate with an LCD. However, we can communicate with an LCD through a 4-bit data bus. Thus we can reduce the total number of communication lines to seven. The wiring for connection via a 4-bit data bus is shown in the diagram below. In this example we use an LCD display with 2Ãâ"16 characters, labeled LM16X212 by Japanese maker SHARP.The message ââ¬Ëcharacter' is written in the first row: and two special characters ââ¬Ë~' and ââ¬Ë}' are displayed. In the second row we have p roduced the word ââ¬ËmikroElektronika'. INTERFACING PIC MICROCONTROLLER TO LCD: [pic] 4. 5 DESIGN OF EMBEDDED SYSTEM Like every other system development design cycle embedded system too have a design cycle. The flow of the system will be like as given below. For any design cycle these will be the implementation steps. From the initial state of the project to the final fabrication the design considerations will be taken like the software consideration and the hardware components, sensor, input and output.The electronics usually uses either a microprocessor or a microcontroller. Some large or old systems use general-purpose mainframe computers or minicomputers. User Interfaces: User interfaces for embedded systems vary widely, and thus deserve some special comment. User interface is the ultimate aim for an embedded module as to the user to check the output with complete convenience. One standard interface, widely used in embedded systems, uses two buttons (the absolute minimum) to control a menu system (just to be clear, one button should be ââ¬Å"next menu entryâ⬠the other button should be ââ¬Å"select this menu entryâ⬠).Another basic trick is to minimize and simplify the type of output. Designs sometimes use a status light for each interface plug, or failure condition, to tell what failed. A cheap variation is to have two light bars with a printed matrix of errors that they select- the user can glue on the labels for the language that he speaks. For example, most small computer printers use lights labeled with stick-on labels that can be printed in any language. In some markets, these are delivered with several sets of labels, so customers can pick the most comfortable language.In many organizations, one person approves the user interface. Often this is a customer, the major distributor or someone directly responsible for selling the system. PLATFORM: There are many different CPU architectures used in embedded designs such as ARM, MIPS, Coldfir e/68k, PowerPC, X86, PIC, 8051, Atmel AVR, H8, SH, V850, FR-V, M32R etc. This in contrast to the desktop computer market, which as of this writing (2003) is limited to just a few competing architectures, mainly the Intel/AMD x86, and the Apple/Motorola/IBM PowerPC, used in the Apple Macintosh.With the growing acceptance of Java in this field, there is a tendency to even further eliminate the dependency on specific CPU/hardware (and OS) requirements. Standard PC/104 is a typical base for small, low-volume embedded and rugged zed system design. These often use DOS, Linux or an embedded real-time operating system such as QNX or Inferno. A common configuration for very-high-volume embedded systems is the system on a chip, an application-specific integrated circuit, for which the CPU was purchased as intellectual property to add to the IC's design.A related common scheme is to use a field-programmable gate array, and program it with all the logic, including the CPU. Most modern FPGAs are designed for this purpose. Tools: Like typical computer programmers, embedded system designers use compilers, assemblers, and debuggers to develop embedded system software. However, they also use a few tools that are unfamiliar to most programmers. Software tools can come from several sources: â⬠¢ Software companies that specialize in the embedded market. â⬠¢ Ported from the GNU software development tools.Sometimes, development tools for a personal computer can be used if the embedded processor is a close relative to a common PC processor. Embedded system designers also use a few software tools rarely used by typical computer programmers. One common tool is an ââ¬Å"in-circuit emulatorâ⬠(ICE) or, in more modern designs, an embedded debugger. This debugging tool is the fundamental trick used to develop embedded code. It replaces or plugs into the microprocessor, and provides facilities to quickly load and debug experimental code in the system. A small pod usually prov ides the special electronics to plug into the system.Often a personal computer with special software attaches to the pod to provide the debugging interface. Another common tool is a utility program (often home-grown) to add a checksum or CRC to a program, so it can check its program data before executing it. An embedded programmer that develops software for digital signal processing often has a math workbench such as MathCad or Mathematica to simulate the mathematics. Less common are utility programs to turn data files into code, so one can include any kind of data in a program. A few projects use Synchronous programming languages for extra reliability or digital signal processing.DEBUGGING: Debugging is usually performed with an in-circuit emulator, or some type of debugger that can interrupt the microcontroller's internal microcode. The microcode interrupt lets the debugger operate in hardware in which only the CPU works. The CPU-based debugger can be used to test and debug the el ectronics of the computer from the viewpoint of the CPU. This feature was pioneered on the PDP-11. As the complexity of embedded systems grows, higher level tools and operating systems are migrating into machinery where it makes sense.For example, cell phones, personal digital assistants and other consumer computers often need significant software that is purchased or provided by a person other than the manufacturer of the electronics. In these systems, an open programming environment such as Linux, OSGi or Embedded Java is required so that the third-party software provider can sell to a large market. OPERATING SYSTEM: Embedded systems often have no operating system, or a specialized embedded operating system (often a real-time operating system), or the programmer is assigned to port one of these to the new system.BUILT- IN SELF- TEST: Most embedded systems have some degree or amount of built-in self-test. There are several basic types. 1. Testing the computer. 2. Test of peripheral s. 3. Tests of power. 4. Communication tests. 5. Cabling tests. 6. Rigging tests. 7. Consumables test. 8. Operational test. 9. Safety test. START UP: All embedded systems have start-up code. Usually it disables interrupts, sets up the electronics, tests the computer (RAM, CPU and software), and then starts the application code. Many embedded systems recover from short-term power failures by restarting (without recent self-tests).Restart times under a tenth of a second are common. Many designers have found a few LEDs useful to indicate errors (they help troubleshooting). A common scheme is to have the electronics turn on all of the LED(s) at reset (thereby proving that power is applied and the LEDs themselves work), whereupon the software changes the LED pattern as the Power-On Self Test executes. After that, the software may blink the LED(s) or set up light patterns during normal operation to indicate program execution progress or errors. This serves to reassure most technicians/eng ineers and some users.An interesting exception is that on electric power meters and other items on the street, blinking lights are known to attract attention and vandalism. CHAPTER 5 [pic] 5. 1 Software Tools: 1. MPLAB 2. Protel 3. Propic 4. HI-Tech PIC C Compiler 5. 2 MPLAB Integration: MPLAB Integrated Development Environment (IDE) is a free, integrated toolset for the development of embedded applications employing Microchip's PIC micro and dsPIC microcontrollers. MPLAB IDE runs as a 32-bit application on MS Windows, is easy to use and includes a host of free software components for fast application development and super-charged debugging.MPLAB IDE also serves as a single, unified graphical user interface for additional Microchip and third party software and hardware development tools. Moving between tools is a snap, and upgrading from the free simulator to MPLAB ICD 2 or the MPLAB ICE emulator is done in a flash because MPLAB IDE has the same user interface for all tools. Choose MPLAB C18, the highly optimized compiler for the PIC18 series microcontrollers, or try the newest Microchip's language tools compiler, MPLAB C30, targeted at the high performance PIC24 and dsPIC digital signal controllers.Or, use one of the many products from third party language tools vendors. They integrate into MPLAB IDE to function transparently from the MPLAB project manager, editor and compiler. 5. 3 INTRODUCTION TO EMBEDDED ââ¬ËCââ¬â¢: Ex: Hitec ââ¬â c, Keil ââ¬â c HI-TECH Software makes industrial-strength software development tools and C compilers that help software developers write compact, efficient embedded processor code. For over two decades HI-TECH Software has delivered the industry's most reliable embedded software development tools and compilers for writing efficient and compact code to run on the most popular embedded processors.Used by tens of thousands of customers including General Motors, Whirlpool, Qualcomm, John Deere and many others, HI-TECH's reliable development tools and C compilers, combined with world-class support have helped serious embedded software programmers to create hundreds of breakthrough new solutions. Whichever embedded processor family you are targeting with your software, whether it is the ARM, PICC or 8051 series, HI-TECH tools and C compilers can help you write better code and bring it to market faster. HI-TECH PICC is a high-performance C compiler for the Microchip PIC micro 10/12/14/16/17 series of microcontrollers.HI-TECH PICC is an industrial-strength ANSI C compiler ââ¬â not a subset implementation like some other PIC compilers. The PICC compiler implements full ISO/ANSI C, with the exception of recursion. All data types are supported including 24 and 32 bit IEEE standard floating point. HI-TECH PICC makes full use of specific PIC features and using an intelligent optimizer, can generate high-quality code easily rivaling hand-written assembler. Automatic handling of page and bank selection f rees the programmer from the trivial details of assembler code. 5. 4 Embedded C Compiler: ? ANSI C ââ¬â full featured and portable Reliable ââ¬â mature, field-proven technology ? Multiple C optimization levels ? An optimizing assembler ? Full linker, with overlaying of local variables to minimize RAM usage ? Comprehensive C library with all source code provided ? Includes support for 24-bit and 32-bit IEEE floating point and 32-bit long data types ? Mixed C and assembler programming ? Unlimited number of source files ? Listings showing generated assembler ? Compatible ââ¬â integrates into the MPLAB IDE, MPLAB ICD and most 3rd-party development tools ? Runs on multiple platforms: Windows, Linux, UNIX, Mac OS X, Solaris Embedded Development Environment:PICC can be run entirely from the. This environment allows you to manage all of your PIC projects. You can compile, assemble and link your embedded application with a single step. Optionally, the compiler may be run directly from the command line, allowing you to compile, assemble and link using one command. This enables the compiler to be integrated into third party development environments, such as Microchip's MPLAB IDE. 5. 5 Embedded system tools: 5. 5. 1 Assembler: An assembler is a computer program for translating assembly language ââ¬â essentially, a mnemonic representation of machine language ââ¬â into object code.A cross assembler (see cross compiler) produces code for one type of processor, but runs on another. The computational step where an assembler is run is known as assembly time. Translating assembly instruction mnemonics into opcodes, assemblers provide the ability to use symbolic names for memory locations (saving tedious calculations and manually updating addresses when a program is slightly modified), and macro facilities for performing textual substitution ââ¬â typically used to encode common short sequences of instructions to run inline instead of in a subroutine.Assemb lers are far simpler to write than compilers for high-level languages. Assembly language has several benefits: â⬠¢ Speed: Assembly language programs are generally the fastest programs around. â⬠¢ Space: Assembly language programs are often the smallest. â⬠¢ Capability: You can do things in assembly which are difficult or impossible in High level languages. â⬠¢ Knowledge: Your knowledge of assembly language will help you write better programs, even when using High level languages. An example of an assembler we use in our project is RAD 51. . 5. 2 Simulator: Simulator is a machine that simulates an environment for the purpose of training or research. We use a UMPS simulator for this purpose in our project. 5. 5. 3 UMPS: Universal microprocessor program simulator simulates a microcontroller with its external environment. UMPS is able to simulate external components connected to the microcontroller. Then, debug step is dramatically reduced. UMPS is not dedicated to only one microcontroller family, it can simulate all kind of microcontrollers.The main limitation is to have less than 64K-Bytes of RAM and ROM space and the good microcontroller library. UMPS provide all the facilities other low-cost simulator does not have. It offers the user to see the ââ¬Å"real effectâ⬠of a program and a way to change the microcontroller family without changing IDE. UMPS provide a low-cost solution to the problems. UMPS is really the best solution to your evaluation. 5. 5. 4 UMPS key features: -The speed, UMPS can run as fast as 1/5 the real microcontroller speed. No need to wait 2 days to see the result of a LCD routine access.All the microcontroller parts are simulated, interrupts, communication protocol, parallel handshake, timer and so on. ââ¬â UMPS have an integrated assembler/disassembler and debugger. It is able to accept an external assembler or compiler. It has a text editor which is not limited to 64K-bytes and shows keyword with color. It can a lso communicate with an external compiler to integrate all the debug facilities you need. ââ¬â UMPS is universal, it can easily be extended to other microcontroller with a library. Ask us for toolkit development. ââ¬â External resource simulation is not limited.It can be extended to your proper needs by writing your own DLL. ââ¬â UMPS allows you to evaluate at the lowest cost the possibility to build a microcontroller project without any cable. ââ¬â UMPS include a complete documentation on each microcontroller which describe special registers and each instruction 5. 5. 5 Compiler: A compiler is a program that reads a program in one language, the source language and translates into an equivalent program in another language, the target language. The translation process should also report the presence of errors in the source program. Source Program |> |à Compiler |> |Target Program | |à |à |v |à |à | |à |à |Error Messages |à |à | There are two parts of compilation. The analysis part breaks up the source program into constant piece and creates an intermediate representation of the source program. The synthesis part constructs the desired target program from the intermediate representation. 5. 5. 6 The cousins of the compiler are: 1. Preprocessor. 2.Assembler. 3. Loader and Link-editor. A naive approach to that front end might run the phases serially. 1. Lexical analyzer takes the source program as an input and produces a long string of tokens. 2. Syntax Analyzer takes an out of lexical analyzer and produces a large tree. Semantic analyzer takes the output of syntax analyzer and produces another tree. Similarly, intermediate code generator takes a tree as an input produced by semantic analyzer and producesà intermediate code 5. 5. 7 Phases of compiler: The compiler has a number of phases plus symbol table manager and an error handler. à |à |Input Source Program |à |à | |à |à |v |à |à | |à |à |Lexical Analyzer |à |à | |à |à |v |à |à | |à |à |Syntax Analyzer |à |à | |à |à |v |à |à | |Symbol Table Manager |à |Semantic Analyzer |à |à Error Handler | |à |à |v |à |à | |à |à |Intermediate Code |à |à | | | |Generator | | | |à |à |v |à |à | |à | Code Optimizer |à |à | |à |à |v |à |à | |à |à |Code Generator |à |à | |à |à |v |à |à | |à |à |Out Target Program |à |à | 5. 6 FABRICATION DETAILS The fabrication of one demonstration unit is carried out in the following sequence. ? Finalizing the total circuit diagram, listing out the components and sources of procurement. ? Procuring the components, testing the components and screening the components. ? Making layout, repairing the interconnection diagram as per the circuit diagram. Assembling the components as per the component layout and circuit diagram and soldering components. ? Integrating t he total unit, intertwining the unit and final testing the unit. CHAPTER 7 CONCLUSION The System RFID BASED ENERGY is developed and operated successfully in the laboratory. The prepaid energy meter was working properly and perfectly. The circuit having potential and current transformers which gives the power consumption in analog form. This is converted to digital and the converted one is again converted into KWH form i. e one unit. According to the tariff rates stored in the microcontroller, The consumed units and cost are displayed on the LCD. Future enhancements: Our project is just to caluculate the reading i. consumed power and caluculate the cost and then display the cost on the LCD. In future this circuit can also be used as a prepaid energy meter using a smart type arrangement. For we want to add a smart card reader and relay in extra. Due to this every customer has a smart card with some credits and after completing these credits we again go to EB and recharge the card. The energy meter reading can be send to the EB by implementing small kind of SCADA system, using this the readings can be straightly monitor by the EB. CODE: #include;pic. h; #includeâ⬠lcd_16x4. câ⬠__CONFIG(XT & WDTDIS & PWRTDIS & BORDIS & LVPDIS & WRTEN & DEBUGDIS & DUNPROT & UNPROTECT); void init(); oid ADC_VTG_CT(); void ADC_VTG_CT1(); void disp_meter(); void delay(); write_eeprom(unsigned char add,unsigned int data); unsigned int read_eeprom(unsigned char add); unsigned int i, j,bal,gsmcost, curt,vltg,crt,tmp,tmp1,k,fcrt,escp,cap_time,testeng,Engeeprom,tempvalue,ROTabv100=0,ROTupt100=0; bank2 unsigned char mill_count,tick1=0,h[15],rec=0; bank1 unsigned char sec, min,hr,check1,VHUDS,VTENS,VONES,CHUDS, CTENS, CONES,COLACK,COTENTH, ETHOD,EHUDS,ETENS,EONES,COTHOD,COHUDS,COTENS,COONES,EEONES,EETHOD,EETENS,EEHUDS,EELACK,EETENTH,unteeprom,unit,var=0,u11,u12,u13; unsigned char tm,tt,th,ctl; float cpwt1,cpwt2,Energy,Cost_engy,Cost; bit check_dev,card_present; ank2 unsigned char q t,msg,n,set1=0,set2=0,set3=0,set,set4=0,tab,cap,cap1,cap2,eeprom_erase_cnt; unsigned interrupt isr(void) { if(TMR1IF) { TMR1IF=0; mill_count++; //mill_count, scan_count, keypress, check, keyok,key if(mill_count;=25) { mill_count=0; sec++; if(sec;=59) { tick1=1; sec =0; ctl=1; min++; if(min;59) { min=0; hr++; if(hr;23) { hr=0; } } } }//mill_count }//TMR1IF if(RCIF==1) { h[rec]=RCREG; rec++; if(rec==12) { card_present=1; rec=0; } RCIF=0; } } void main() { init(); RC4=0; while(1) { lcd_move(0,0); lcd_puts(ââ¬Å"Energy Meterâ⬠); RC4=0; if(card_present==1) { lcd_move(1,0); lcd_puts(ââ¬Å"Recharged:â⬠); if(h[9]==51) { lcd_move(1,10); lcd_puts(ââ¬Å"Rs. 100â⬠); or(j=0;j;=45000;j++); for(j=0;j;=45000;j++); gsmcost= 100; set1=1; card_present==0; lcd_clear(); } if(h[9]==56) { lcd_move(1,10); lcd_puts(ââ¬Å"Rs. 50 ââ¬Å"); for(j=0;j;=45000;j++); for(j=0;j;=45000;j++); gsmcost= 50; set1=1; card_present==0; lcd_clear(); } } while(set1==1) //&& SW==1) { //while(SW==1); lcd_mov e(0,0); lcd_puts(ââ¬Å"Energy Meterâ⬠); COLACK =read_eeprom(0x00); COTENTH =read_eeprom(0x01); COTHOD =read_eeprom(0x02); COHUDS =read_eeprom(0x03); COTENS =read_eeprom(0x04); COONES =read_eeprom(0x05); Engeeprom = ((COLACK*100000)+(COTENTH*10000)+(COTHOD*1000)+(CHUDS *100)+(COTENS *10)+COONES); unteeprom =read_eeprom(0x06); ROTupt100 =read_eeprom(0x07);ROTabv100 =read_eeprom(0x08); disp_meter(); RC4=1; DelayMs(10); ADC_VTG_CT(); } while(set2) { lcd_move(0,0); //lcd_putn(check1); disp_meter(); ADC_VTG_CT1(); lcd_move(0,0); lcd_puts(ââ¬Å"vtg:â⬠); lcd_write(VHUDS+0x30); lcd_write(VTENS+0x30); lcd_write(VONES+0x30); lcd_move(0,8); lcd_puts(ââ¬Å"crt:â⬠); lcd_write(CHUDS+0x30); lcd_puts(ââ¬Å". ââ¬Å"); lcd_write(CTENS+0x30); lcd_write(CONES+0x30); RC4=1; DelayMs(10); if(curt) { tm = min ââ¬â cap_time; //check1=1; if(min ; 58) { th++; } tt = (th*60)+tm; if(ctl==1) { ctl=0; //check1=2; Energy = ((vltg * curt *(float)tt)/100000); Energy = Energy*1000; testeng = (i nt)Energy; Energy = Energy/1000; Cost = Energy * cpwt1;Cost_engy = Cost + Cost_engy; bal = gsmcost ââ¬â Cost_engy ; Cost_engy = Cost_engy*1000; Engeeprom = (int)Cost_engy; //bal = gsmcost ââ¬â Engeeprom ; fcrt =bal; COLACK = fcrt/100000; fcrt=fcrt%100000; COTENTH=fcrt/10000; fcrt=fcrt%10000; COTHOD=fcrt/1000; fcrt=fcrt%1000; COHUDS=fcrt/100; fcrt=fcrt%100; COTENS=fcrt/10; fcrt=fcrt%10; COONES=fcrt; write_eeprom(0x00,COLACK); write_eeprom(0x01,COTENTH); write_eeprom(0x02,COTHOD); write_eeprom(0x03,COHUDS); write_eeprom(0x04,COTENS); write_eeprom(0x05,COONES); DelayMs(2); Cost_engy = Cost_engy/1000; if(Energy;0. 900) { Energy = 0; unit++; unteeprom = unit; write_eeprom(0x06,unteeprom); DelayMs(2); if(unit==100) { cpwt1 = cpwt2; nit = 0; } } } } else { set1=1; set2=0; lcd_clear(); } /*if(SW==1) { while(SW==1); RC4=0; set1=0; set2=0; lcd_clear(); } */ }//while(set2) }//while(1) }//main() void init() { TRISA = 0xFF; TRISB = 0xF0; TRISC = 0x80; PORTB = 0x00; ADCON1=0X82; GIE=PEIE= TMR1IE=RCIE=1; TMR1L=0X17; TMR1H=0XFC; SPBRG=25; BRGH=1; RCSTA=0X90; TXSTA=0X24; cpwt1 = . 4; Cost_engy = 0; unit = 0; unteeprom = 0; Engeeprom = 0; eeprom_erase_cnt=read_eeprom(0x10); if(eeprom_erase_cnt;5) { eeprom_erase_cnt=0; write_eeprom(0x10,0); write_eeprom(0x00,0); write_eeprom(0x01,0); write_eeprom(0x02,0); write_eeprom(0x03,0); write_eeprom(0x04,0); write_eeprom(0x05,0); } else { eprom_erase_cnt++; write_eeprom(0x10,eeprom_erase_cnt); } lcd_init(); //set1=1; T1CON=0X01; DelayMs(10); } void disp_meter() { if(set1) { lcd_move(1,0); lcd_puts(ââ¬Å"U:â⬠); lcd_putn(unteeprom); } if(set2) { fcrt =testeng; ETHOD=fcrt/1000; fcrt=fcrt%1000; EHUDS=fcrt/100; fcrt=fcrt%100; ETENS=fcrt/10; fcrt=fcrt%10; EONES=fcrt; lcd_move(1,0); lcd_puts(ââ¬Å"E:â⬠); lcd_write(ETHOD+0x30); lcd_puts(ââ¬Å". ââ¬Å"); lcd_write(EHUDS+0x30); lcd_write(ETENS+0x30); lcd_write(EONES+0x30); } lcd_move(1,8); lcd_puts(ââ¬Å"C:â⬠); if(COLACK) { lcd_write(COLACK+0x30); lcd_write(COTENTH+0x30); lcd_write(COTHOD+0x30); } else if(COTENTH) { lcd_write(COTENTH+0x30); lcd_write(COTHOD+0x30); //lcd_puts(ââ¬Å". ); lcd_write(COHUDS+0x30); lcd_write(COTENS+0x30); //lcd_write(COONES+0x30); } else { lcd_write(COTHOD+0x30); lcd_puts(ââ¬Å". ââ¬Å"); lcd_write(COHUDS+0x30); lcd_write(COTENS+0x30); lcd_write(COONES+0x30); } /*********************AT COMMANDS********gsm energy meter coding********* if(tick1==1) { tick1=0; u11=unteeprom/100; u12=(unteeprom%100)/10; u13=unteeprom%10; sendtopc1(ââ¬Å"ATâ⬠); TXREG=13; while(! TXREG); delay(); for(k=0; k
Thursday, August 1, 2019
The Role Of Health Ngos Health And Social Care Essay
Health attention in Nigeria is structured along, and administered through the cosmopolitan three grades: the primary degree run by the local authorities, the secondary by the province and the third by the federal authorities ( FMOH 2005 ) . The part of Nigeria ââ¬Ës wellness sector to the national economic system remains ill defined, and as a consequence Nigeria was ranked a blue 187th place among the 191 United Nation member province ( WHO 2000 ) .Health attention installations are unequal in Nigeria ( Yohesor 2009 ) and this includes wellness Centres, forces and medical equipment. Moreso, the province of bing installations is frequently distressing due to miss of care. As Lee provinces: ââ¬ËA wellness attention system is an organisational model for the distribution or service of the wellness attention demands of a given community. It is a reasonably complex system of inter-related elements that contribute to the wellness of people-in their places, educational establishments, in work topographic points, the populace ( societal or recreational ) and the psychological environments every bit good as the straight wellness and health-related sectors. ââ¬Ë ( Lee 2009: 1 ) . However, with the many societal and infrastructural jobs facing the state is the chase of the politically attractive third wellness attention which, arguably, has remained the lone attractive country of the wellness system, to the hurt of other degrees of attention. The disregard of Nigeria ââ¬Ës wellness attention, with particular mention to the primary wellness attention system, its maldistribution, will ensue in an upside-down wellness attention pyramid. By deduction, instead than bring forth wellness for the people, would ever hold the menace to fall in on itself. Harmonizing to Asuzu ( 2003 ) , Nigeria ââ¬Ës wellness attention system has experienced past reforms, runing from the traditional wellness attention system that existed in the single Nigerian communities and the cultural groups before the epoch of colonisation boulder clay day of the month. Though Nigeria ââ¬Ës wellness attention system is geared towards guaranting handiness and handiness of wellness attention by Nigerians, yet the state ââ¬Ës wellness attention remains a major concern. On the other manus, wellness attention reform is the ââ¬Ëprocess of bettering the public presentation of bing systems of presuming efficient and just responses to future alterations. It has besides been defined as sustainable, purposeful alteration aimed at bettering the wellness sector ; wellness attention reform is initiated by public or political action, is motivated by dissatisfaction caused by the failure to present results and implemented on a sector broad degree ( Berman 1995 ) . This presupposes that reforms might turn to the jobs of hapless quality of attention, inefficiencies in the bringing of services, inequalities and limited entree to wellness, degree of answerability and deficient reactivity to client demands. Globally, it would look Non-governmental Organizations have undertaken a broad scope of maps, including but non limited to, human-centered aid, developmental assistance, and publicity of human rights and lobbying to protect the environment. In other words, the function of non-governmental ( NGOs ) might hold been seen to spread out. Capturing the kernel of wellness NGOs, Gilson states: â⬠¦..humanitarian aid is ââ¬Ëassistance given to run into the challenges of a human-centered crisis, about ever includes proviso of some type of health care, be it preventative action ( such as supplying shelter, clean H2O and healthful installations, immunisation against epidemics ) or direction of exigencies ( such as hurts from a catastrophe ) . ââ¬Ë Arguably, Nigeria is presently undergoing wellness sector reform aimed at accomplishing improved efficiencies in resource use, improved quality of wellness services every bit good as greater equity of entree to wellness services. Jong-Chan ( 2002 ) asserts that given the strong influence they possess, NGOs remain the lone sector that can authorise the populace to demand a stable national wellness plan ; NGOs should convey their experiences in wellness attention reform to bear in order to beef up their alone place in the wellness attention system, independent of both governmental laterality and medical liberty. In the visible radiation of the above averment, it would look Non-governmental organisations ( NGOs ) have ever been in the head of progressing fresh thoughts, and in encouraging and back uping authoritiess to implement them. At a simple degree, NGOs by and large represent the ââ¬Ëvoice of the people ââ¬Ë at all levels- local, national and international, and have taken on functions such as protagonism, instruction and preparation ( Ogunbekun, 2004:3 ) , and have been active in monitoring and bettering what has, or has non, been implemented or achieved. For illustration, NGOs have been in the forepart burner in advancing, developing and bettering a comprehensive and holistic attack to wellness attention services. For alteration to go on, it would be necessary to join forces with the relevant stakeholders in the wellness sector, whether they work in authorities, in disposal, or as suppliers of the necessary services, to convey approximately needed alteration and betterment ; besides to guarantee the people understand and support the alterations which need to be made ( Lorgen, 1998 ) . Moreso, wellness professional associations might be effectual in working with wellness NGOs in bettering wellness attention bringing. Often, they seek the advice of wellness professionals sing issues around wellness attention, basically because they know that medical moralss require doctors to supply nonsubjective advice on wellness issues, in the best involvements of their patients ( Pfeiffer 2003 ) . Health NGOs, together with wellness professionals, might besides use the accomplishments and experiences that NGOs have garnered in seting information and messages across to the populace in such a manner that the populace is able to understand and this will be necessary in bettering wellness attention. The function or value of NGOs in progressing wellness is hinged on three premises, emerging from the research enterprise of George Washington University ââ¬Ës Centre for international Health: Individual wellness and communities ââ¬Ë socio-economic development are per se linked ; Well targeted wellness publicity activities can lend non merely to better wellness but can besides heighten an person ââ¬Ës societal wellbeing ; Local NGOs whose members are antiphonal to the communities they serve, are more likely to supply this linkage through furthering community authorization. Many NGOs are involved in preparation programmes which is a function they seem to hold undertaken at all degrees. Therefore, they are well-positioned to help the relevant authorities sections in conveying about alterations and betterment in wellness attention system ( Gilson 2003 ) . It would follow that NGOs should be invited by authoritiess to help as spouses in creative activity of consciousness, mobilisation and development of developing programmes on wellness attention reforms. Besides, wellness NGOs seem to hold the capacity to authorise communities to move on their ain behalf, fiting people to better the ââ¬Ësocial and physical environments contributing for healthy life styles, and of wellness protagonism to enable policy shapers to acknowledge and appreciate the necessity for betterments in wellness attention conditions ââ¬Ë ( Starfield 2011 ) . Following the policy statement of World Health Organization ââ¬Ës 1978 Alma Ata Conference, besides known as the Alma Ata Declaration, which proposed that ââ¬Ëprimary wellness attention ( PHC ) be adopted for wellness planning and bringing, stressing on equity in wellness, disease bar, and a comprehensive scheme to advance single and community wellness ââ¬Ë ( Rodriguez 2001 ) , a wellness instruction scheme might propose that within a socio-political context, wellness instruction aims to increase person ââ¬Ës consciousness of his or her wellness position, and the causes and determiners of that position, thereby increasing the possibility for positive action. As Asuzu ( 2003 ) points out â⬠¦ ââ¬ËNGOS act as accelerator by promoting the assorted sections concerned with wellness to go actively involved in reform exercisesâ⬠¦ ââ¬Ë This would be effectual if different NGOs work in synergism. For case, in add-on to wellness NGOs, there is engagement of other relevant NGOs such as adult females ââ¬Ës NGOs that concentrate on activities to better the position of adult females and development NGOs whose Centre of involvement or activity is peculiarly on issues around development. Health NGOs, arguably, are dependent on their authorization or undertaking charter which is in tandem with the overall programmes of a wellness attention system within which they operate. Harmonizing to Ohanyido ( 2012 ) , the functions of wellness NGOs are summarized below: â⬠¢ work to guarantee that the wellness services are efficient, effectual, and accessible. â⬠¢ work within the wellness system to guarantee that the figure of well-trained staff is available through capacity- edifice or protagonism to authorities etc. â⬠¢ aid guarantee that the wellness information system is able to bring forth utile informations on wellness determiners and wellness system public presentation, and besides avoid making parallel systems â⬠¢ work with all stakeholders to guarantee that there is entree to medical specialties, vaccinums, and medical engineerings in an just manner. â⬠¢ strengthen wellness financing systems by researching support beginnings and recommending to stakeholders to raise equal financess for wellness, and guaranting that people can entree low-cost services. â⬠¢ strengthen the system by guaranting that the Leadership must vouch effectual inadvertence, ordinance, and answerability. However, in order to work expeditiously and efficaciously in bettering wellness attention system, wellness NGOs themselves must besides be found to be accountable, crystalline, and seem to be stand foring the involvements of the people.
Wednesday, July 31, 2019
Directress
Montessori is not simply a method of teaching children to read; it is a philosophy of life! Montessori Method for education is fundamentally based on an educational approach towards a model of human development. By human development we mean the development psychology of a human being, that is, the innate quality of any human to learn through their experiences. Montessoriââ¬â¢s education method called for free activity within a ââ¬Å"prepared environmentâ⬠, meaning an educational environment tailored to basic human characteristics and to the specific characteristics of children at different ages.Since the Montessori Method is so unlike other educational methods, it follows that the Montessori teacher is in fact not a teacher at all, Dr. Maria Montessori called her a DIRECTRESS. In her years of observations, Dr. Montessori used the word ââ¬ËDIRETTORESSAââ¬â¢ taken from the Italian word ââ¬ËDIRETTOREââ¬â¢ which when looking into the meaning of the word is less about telling people what to do but more about steering people in the right direction. According to Dr. Montessori a directressââ¬â¢ role is to be an ardent observer with the goal to intervene the least as the child develops. Related article: Montessori Practical Life EssayThe directress creates an environment of calm, order and joy in the classroom and is there to help and encourage the children in all their efforts, allowing them to develop self-confidence and inner-discipline. With the younger students at each level, the teacher is more active, demonstrating the use of materials and presenting activities based on an assessment of childââ¬â¢s requirements. Knowing how to observe constructively and when and how much, to intervene, is one of the most important talents a directress acquires. A directress has to be very careful in praising a child.She should respond to a childââ¬â¢s enthusiastic approach of working at the same time she should praise the child in a way that it gets motivated through her interest rather than seeking her merit or approval. In short a directress should channelize the childââ¬â¢s capabilities in the right direction order to make them a self-understanding, knowledgeable, independent and a developed adult. The role of a directress with respect to teaching the child is an inactive one, the active learning must come from the child and itââ¬â¢s the duty of the directress to bring the childââ¬â¢s activeness in learning and exploring new things.They are constantly experimenting, modifying the environment to meet their perception of each childââ¬â¢s needs and interests and objectively noting the results. The directressââ¬â¢ work is to ââ¬Ëguideââ¬â¢ the child, be like a second parent to all the children in her class. In most cases Montessori teachers are the first motherly figure that a child meets outside their homes. Thatââ¬â¢s why it is compulsory for the teacher to take on, not only the role of a teacher, but a second mother- like position too. She explains the child, in an understanding and calm manner.She is patient with them when they do something wrong. She allows the child to choose his own activity rather than force him into something in which he had no interest and also motivating them to keep the material back in place, so that the child respects his environment. If the child is afraid, she handles the child in a calm-composed manner to ease the childââ¬â¢s fear. The directress also makes it a point to make all the children comfortable with each other to maintain a positive environment in the class and to build a positive attitude in the child and encourage social interaction.She handles disputes, without being bias. She offers support when a child lacks confidence. ââ¬Å"Never help a child with a task at which he feels he can succeed. â⬠ââ¬Å"Free the childââ¬â¢s potential and you will transform him into the world. â⬠The directress acts as an active-link between the child and the ââ¬Å"prepared environmentâ⬠in a sense that all the materials and apparatus are kept in their accurate places in the class. The intellectual ability of a child that is revealed during the tender a ge of the child should be respected in all its aspects. It is like a flower that has just started to bloom.The Montessori teacherââ¬â¢s work in preparing the classroom together with her interactions among the children enables her to provide the children the most positive means by which they can absorb the environment. The greatest sign of success for a teacher is to exclaim, ââ¬Å"The children are now working as if I do not existâ⬠. Montessori uses the term ââ¬Ënormalizationââ¬â¢ to describe this unique process a child experiences in the classroom. A normalized child is ââ¬Å"one who has overcome himself and lives in peace and harmony with the environment preferring disciplined tasks to futile idealness. She believed that children are born with innate capacities for self-governance which should develop freely. She also said that the greatest barriers to development of these natural instincts in children are adults. Thus the classroom must provide activities and motiv es for Normalization to occur. This is due to the fact that Normalization emerges as a result of deep concentration. The materials chosen by the children will emerge the, and lead them to self-discovery and awareness. Ultimately, it is the directressââ¬â¢ role as the ââ¬Ëdynamic linkââ¬â¢ which allows the process of normalization to occur.One must not forget, however, that it cannot occur immediately. The teacher must also prepare herself for a period of practice which may take many years. The ââ¬Ëspiritually preparedââ¬â¢ teacher will recognize this critical factor, and through her practice as an observer of children, can further observe the spiritual growth within herself. The role of the directress is therefore, ââ¬Å"to watch with humble reverence, day by day, the spontaneous unfolding of the childrenââ¬â¢s lives; seeking always to remove obstacles, both internal and external from their path, whilst she guides with science and sympathy the irrepressible energi es of lifeâ⬠.The spiritually prepared teacher will do so with a joyous heart. Only then can the most important factor in her role can be established, that is, to see the child for who he really is. The reason a Montessori teacher is called a directress is that she directs her children to a path where they want to go rather than simply teaching them the basic rules of living or transfer knowledge to them.The children are independent of the directress and explore the world according to their wish. They need the directress only in case they get stuck somewhere or they have problem in understanding anything rather than having a teacher who imparts knowledge to the child just because he have to know that. School teachers have a formal outlook towards their career whereas a directress can survive in this place only if she puts her heart filled with love into her career.
Subscribe to:
Posts (Atom)